CoolCoated Concentrated Additive

CoolCoated Concentrated Additive is a powerful, non-toxic, low-VOC solution designed to transform your existing paint or roof coating into a heat-reflective surface, reducing temperatures by 15–40% and cooling costs by up to 40%. Perfect for DIY enthusiasts and professionals, this additive integrates seamlessly with standard paints or coatings, offering an eco-friendly way to enhance energy efficiency on roofs, walls, and other surfaces.

Key Features

Energy Savings: Reduces cooling costs by up to 40% by enhancing heat reflection.

Eco-Friendly: Non-toxic and low-VOC, safe for the environment and your home.

Versatile Mixing: Easily mixes with most water-based paints or coatings for customized applications.

Durable Performance: Maintains heat-reflective properties for 5–10 years, depending on conditions.

Cost-Effective: A small amount enhances large volumes of paint or coating.

Application Fields

Formulated For: Water-based roof coatings and exterior paints.

Also Suitable For: Acrylic paints, latex paints, cement-based coatings, and sealants used on roofs, walls, or patios.

Instructions

Surface Preparation

Read the technical data sheet thoroughly.

Test the additive with a small batch of your chosen paint or coating to ensure compatibility.

Clean the target surface by removing dust, debris, grease, or loose material using a broom, pressure washer, or vacuum.

Ensure the surface is dry and free of contaminants that may affect adhesion.

Protect adjacent areas (e.g., windows, plants) with plastic sheeting or tape.

Product Application

Dilute the additive with your chosen paint or coating at a 1:10 ratio (1 part additive to 10 parts paint/coating).

Stir thoroughly for 2–3 minutes to ensure even distribution.

Apply the mixed solution using a sprayer, roller, or brush, following the base paint/coating’s application guidelines:

Coverage Rate: Varies based on base material; typically, 1 quart of additive enhances 2.5 gallons of paint/coating, covering 250–400 square feet.

Application: Apply in thin, even layers to avoid streaking.

Allow the mixture to act for the base material’s recommended drying time (typically 2–4 hours).

Work in small sections to ensure uniform coverage. Reapply lightly if needed for highly absorbent surfaces.

Avoid applying in direct sunlight or temperatures below 50°F or above 90°F.

Residue Removal

Rinse tools and overspray areas with clean water immediately after use.

Remove excess mixture with a wet cloth or sponge if needed.

Allow the surface to dry completely before assessing results. Reapply if necessary.

Drying Time

Drying time depends on the base paint/coating, typically 2–4 hours to touch and 24–48 hours to cure.

Ensure no foot traffic or exposure to rain during curing.

Cleaning of Equipment

Clean mixing containers, sprayers, rollers, and brushes with water immediately after use.

Dispose of unused mixture per local regulations.

Storage & Shelf Life

Store in a cool, dry place away from freezing temperatures and direct sunlight.

Shelf life of 24 months when stored in the original, unopened container.

Technical Specifications

Mixing Ratio: 1 part additive to 10 parts paint/coating.

Coverage: 1 quart enhances 2.5 gallons of paint/coating, covering 250–400 square feet.

Drying Time: 2–4 hours to touch; 24–48 hours to cure (varies by base material).

Shelf Life: 24 months.

VOC Content: Low (<50 g/L), compliant with environmental regulations.

Application Temperature: 50°F–90°F.